Worm reducer indispensable maintenance work

AC Motor Worm Gearbox 10 essential maintenance work:
1, the worm reducer suitable for continuous duty 24 hours and allows forward and reverse operation.
2, single-stage worm gear and the output shaft of the steering input shaft turn in the opposite, two-stage worm gear and the output shaft of the steering input shaft steering the same.
3, the worm gear without self-locking effect.
4, the worm gear output shaft can not withstand the steering shaft.
5, overload may occur in the use of the occasion, overload protection device should be installed.
6, foot type horizontal mounted worm reducer cycloid confidential installed in no vibration, very strong level, based on the installation must be carried out using the occasion of the tilt, tilt worm gear axis shall not exceed plus or minus 15 degrees.
7, flange mounted vertical cycloid worm gear in the installation, the output shaft vertically downwards.
8, such as the need to use other special type of installation other than foot and flange mounted horizontal vertical installed, must take appropriate measures to ensure lubrication and seal worm reducer adequate lubrication and to prevent oil spills. Please contact our technical department.
9, using grease lubricated worm reducer cycloid free installation angle.
10, when the worm gear is installed, can be used to adjust the pad, the pad height direction of not more than three, must change into after the worm gear calibration flat pad.