Routine maintenance gearhead

vertical gear reducer are often used in a general reduction gearing original moving parts and work between machines, between the prime mover and the working machine to match the speed and play the role of transmitting torque, is currently in the machinery industry wide range of applications. Because of the widespread use of the gear unit, so we need to pay more attention to daily maintenance gearhead.
Maintenance on the device
We regularly check the installed base. Seals and drive shafts and other is normal;
We use normal gear when we need to frequently check the lubricating oil level, oil temperature is too high leading machine-generated noise, we have to stop to check machinery troubleshooting later, to continue to use;
When replacement parts must be approved after trials before official use;
Gravity can not hammer gear casing, in order to avoid damage to the machine.
Inspection and replacement of lubricants
Reducer work environment temperature between -40 ~ 40 ℃, when the temperature is below 0 ℃, before the start of the oil must be heated to above 0 ℃ or using lubricating low freezing point;
Regularly check the quality of the oil, save enough oil, timely replacement of impurities or deterioration of lubricating oil;
To inject lubricating oil when the gear unit must be in accordance with the requirements of different brands of oil Do not mix different concentrations of lubricant should preferably use less.